1. Mvci Driver For Toyota Windows 7 64 Bit Download
  2. Mvci Driver For Toyota 64-bit Download
  3. Mvci Driver For Toyota 64 Bit
  4. Mvci Driver For Toyota Windows 7 64 Bit

Especially download Windows XP system for Techstream interface (suggested by obdexpress technicians), just to shut off the DRL’S. Then leaved it aside.

Recently, wanted to shut off the passenger side seatbelt warning. My little daughter are always annoyed with that. No way!! But, only with Win 8 now.

Found this last week, had a tried, and it worked wonderfully on my Asus Windows 8.1 Intel i3 notebook:

The thread includes a dropbox link where you can download “all” of the needed files, but really all you need from there is the MVCI driver and the .reg registry hack file.

Get the latest Techstream from:contact with Email: sales@OBDexpress.co.uk to get software file free)

There are a number of steps to getting the driver installed manually, be sure to follow ALL of them before plugging the cable in.
On my 8.1 installation, when I plugged in the TIS cable, Windows automatically looked for and installed the driver, so if you haven’t followed the instructions to that point, it will load the 32 bit driver.

After installing the driver, you need to run the registry hack. Mine downloaded as mvci-x64.reg.txt (might be a Dropbox restriction), simply rename to mvci-x64.reg
After renaming the registry hack file you then need to run the file, which will merge the contents with the registry (will probably get a Windows modification confirmation)

Mvci

May 07, 2015 I am trying this on Windows 10 Pro 64-bit. However, when I am running command 'msiexec /a 'C: temp Techstream MVCI Driver for TOYOTA.msi' /qb TARGETDIR=c: temp mvci', AVG software is finding viruses. Is that OK or is the downloaded file infected? Enter customer information, User Name: AADD, Company name: toyota, press Next. Install the program. Step 2: Install driver. Run MVCI Driver for Toyota-Cable 2.0.1. Install Mini VCI driver for Toyota TIS, press Next. Ready to install. Finish driver installation. Step 3: Crack Techstream Open Techstream software on the desktop.

Once the driver was loaded and I verified with the firmware update utility that it was communicating (don’t try to update the firmware), I was ready to install and run Techstream.

Mvci Driver For Toyota Windows 7 64 Bit Download

Again, follow the directions on installation.
One .ini file needs to be edited to “activate” the program.

2.1 Install 'MVCI Driver for TOYOTA.msi' 2.2 run the 'TISKEY.exe' in CD to Active the software automatically, the Icon 'VCXConnect' on desktop is no use, you can delete it. Run the 'Techstream' on desktop 3.1 Select the area 'Europe' 3.2 Select the language you want. Mvci Driver For Toyota X64 Aug 19, 2015  XHORSE MVCI is a 3-in-1 Auto Diagnostic Tool for Honda, Toyota and Volvo vehicle, and it work with Volvo Dice Vida software, Honda HDS HIM software and toyota techstream tis software, do you know how to install & run MVCI software on Windows 7/8 64-bit OS? MINI VCI for TOYOTA Single Cable Supports Toyota TIS Techstream V16.00.017 Diagnostic Software $ 35.99 € 31.02 £ 26.66 4,031 円 AU$ 47.57 C$ 45.01 In Stock.

Upon loading, you’ll need to select “Europe” and then your preferred language. The key thing is that only the “Europe” option works.
For the user and all other blank mandatory fields, I just typed in “111” and left the default “Albania”

Next, select VIM type xHorse
Now, you’ll want to set your preferences for units. It defaults to metric, and it also defaults to absolute for the TPMS so at first you’ll be scratching your head at the 46psi tire pressure… set that one to “gauge”

There is no need to launch anything in XP compatibility or anything (at least not on my Windows 8.1 system)

PS. Yesterday, I found some tested TIS on Win10 X64! Then tested this version on my wife’s Corolla using 32 bit Windows 10 just to see if it would work. It did. Also noticed that Win10 put in its own driver for the Techstream cable which seemed to work just fine with the program.

Oh, yes. This may work for MVCI cable also, with the same software Techstream.

Mvci Driver For Toyota 64 Bit

who like this article also viewed:

Mvci Driver For Toyota 64-bit Download

Hello, everyone!
Recently I‘ve got myself the MINI VCI cable to play with. As it turned out, with little manual tweaking it is possible, contrary to the popular belief, to get it working under Windows 64-bit. So, I decided to share the instructions, which hopefully will save someone a headache of dealing with dual boot and virtual machines with Windows XP :).For
Equipment:
  1. MINI VCI cable for TOYOTA TIS Techstream. I‘ve bought mine from Amazon for around $30. The cable is about 4’ long, with translucent casing and “MINI-VCI J2534 Standard OBDII Communication Interface” sticker:
    http://www.toyota-4runner.org/attach...1&d=1379402043
    The cable comes with a mini CD with drivers and Toyota Techstream software. Mine was advertised as “Newest V8.00.034 MINI VCI for TOYOTA TIS Techstream Diagnostic Cable & Software”. The “newest” refers to the version of bundled Techstream, rather than the cable firmware, as cable shows serial number “MVCI006000001” and firmware version 1.4.1, which is widely known as “cheap clone of the original XHorse MVCI cable”.
  2. A laptop running 64-bit version of Windows 7/8. Mine is actually Windows 8 x64, but for Windows 7 the configuration procedure should be identical.

The content of bundled mini-CD:
http://www.toyota-4runner.org/attach...1&d=1379402148

Mvci Driver For Toyota 64 Bit


The Techstream, MVCI drivers and TIS Key all can be found on the Internet as well.
Steps:
  1. Download and install a trial version of WinRAR
  2. Using WinRAR Unpack the following files from mini-CD to a temp folder anywhere on your hard drive (e.g. c:temp).
    - Toyota Techstream 8.00.034.rar
    - Techstream_Update_V8.10.021.rar
    - MVCI Driver for TOYOTA.rar
    - TIS KEY.rar
    http://www.toyota-4runner.org/attach...1&d=1379403536
  3. Now open WinRAR again, navigate to the temp folder with unpacked files and double click the TISKey.exe in WinRAR.
    http://www.toyota-4runner.org/attach...1&d=1379403636
    The TISKey.exe is actually a self-extracting (SFX) RAR archive file. Once executed, it simply unpacks and copies the IT3System.ini file to the Techstream folder. Extract that IT3System.ini to the same folder for now.
  4. Installing MVCI Driver for TOYOTA
    This is the step which most people stumble upon as “MVCI Driver for TOYOTA.msi” installer indeed does not work on Windows x64. The workaround is to install it manually, as follows:
    1. Open Command Prompt in Administrator Mode. Navigate to the c:temp folder and run the following command line:
      msiexec /a 'C:tempMVCI Driver for TOYOTA.msi' /qb TARGETDIR=c:tempmvci
      This will extract the content of the MSI file to the c:tempmvci folder:
      http://www.toyota-4runner.org/attach...1&d=1379404181
    2. Delete the “MVCI Driver for TOYOTA.msi” there and then copy the whole
      content of c:tempmvci to 'C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS'
    3. Plug the MINI VCI cable to the USB port.
    4. Open the Device Manager and locate two failing devices in the list. Both will appear with yellow icon (usually under “Other”), indicating that Windows failed to install drivers for them. Now, right click each failing device, select Install Driver, then “Browse my Computer…” and point it for 'C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS' (enable the “include subfolders” flag). Click “Next” and wait until drivers are installed.
      You should now see two new devices: “Universal Serial Bus ControllersUSB Serial Converter” and “Ports (COM & LPT)USB Serial Port (COM5)”.
    5. Run the FirmwareUpdateTool.exe from the 'C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS'. Click “Device Info”. You should see the “device connected” screen like this:
      http://www.toyota-4runner.org/attach...1&d=1379404547
      If you see this, it means your MINI VCI is up and running under Windows x64 and can be used by other programs, such as Techstream.
      IMPORTANT: Some people have reported that updating firmware on this “cheap clone” cable may render it dead. So, the Firmware Update Tool should not be used for anything, but checking that the device is connected and working properly.
  5. Now install Techstream software using 'Techstream 8.00.034.exe' and then update to 8.10 with 'Techstream_Update_V8.10.021.exe'. Do not launch it yet.
    To activate it, copy the IT3System.ini you extracted before to 'C:Program Files (x86)Toyota DiagnosticsTechstreamEnv'.
    Alternatively, you may copy two files from the C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TISProgramFilesFolderToyota DiagnosticsTechstreamEnv' to 'C:Program Files (x86)Toyota DiagnosticsTechstreamEnv', which seem to do the trick as well.
  6. Registry Hack: for Techstream to recognize MINI-VCI under Windows x64, the Registry has to be modified as:

    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSu pport.04.04]
    [HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSu pport.04.04XHorse - MVCI]
    'Name'='XHorse - MVCI'
    'Vendor'='XHorse ELECTRONICS Co.,Ltd.'
    'ConfigApplication'='C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TISFirmwareUpdateTool.exe'
    'FunctionLibrary'='C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TISMVCI32.dll'
    'APIVersion'='04.04'
    'ProductVersion'='1.1.0'
    'ProtocolsSupported'='J1850VPW:1, J1850PWM:1, CAN:1, ISO9141:1, ISO14230:1, ISO15765:1'
    'J1850VPW'=dword:00000001
    'J1850PWM'=dword:00000001
    'ISO9141'=dword:00000001
    'ISO14230'=dword:00000001
    'CAN'=dword:00000001
    'ISO15765'=dword:00000001
    'SCI_A_ENGINE'=dword:00000000
    'SCI_A_TRANS'=dword:00000000
    'SCI_B_ENGINE'=dword:00000000
    'SCI_B_TRANS'=dword:00000000

    The attached 'mvci-x64.zip' contains the *.REG file that has to be imported to the Registry (extract, right click, then Merge)
    A trick here is the 'Wow6432Node' in key path, which is the location the 32-bit applications running on 64-bit OS get redirected to when accessing Registry. The 'PassThruSupport.04.04' seems to be the place Techstream looks into for available VIMs (sub-keys appear in the 'VIM Select' menu in Techstream).
  7. Run Techstream. Go to Setup | VIM Select menu and select the “XHorse - MVCI”
  8. Connect MVCI cable to your car’s OBDII interface, turn ignition on, then click “Connect to Vehicle” in Techstream. Wait. Then wait again (by the way, you'll be doing that a lot with this cable :)). If everything works, you will be prompted to confirm car year/model after which you'll get to the diagnostic interface.
Mvci
Mvci driver for toyota 64 bit The built-in Techstream cable diagnostics shows:
http://www.toyota-4runner.org/attach...1&d=1379406655
So far, I tested the cable with 2013 4Runner, 2004 Sienna and 1997 Camry LE/4cyl, and it seems to work fine with all of them. Absence of (L) line connection means no support for ECU re-flashing (which is not something I'm comfortable doing myself anyway). Option customization/clearing DTC is possible (already verified).
Overall, not bad for a $30 gadget, in my opinion.
Good luck!

Mvci Driver For Toyota Windows 7 64 Bit

Alex.

⇐ ⇐ Platingui 750 Mac Osx.jar
⇒ ⇒ Free Svg Tools